Contenu
A toggle switch is so named because it is a switch with a long handle, or toggle, to control it. A very versatile device, toggle switches are found in everything from boats to heavy equipment. This article will demonstrate how to wire a toggle switch in a car or truck.
Step 1
Locate a fused line as near as possible to the proposed location for the toggle switch, using a test light.
Step 2
Mount the toggle switch. You can use a switch panel for this, or drill a hole for the switch to mount through. Check your switch, this hole will generally be 1/2 inch, but some switches do need a larger hole.
Step 3
Connect a wire from the fused source to the center terminal of the toggle switch. Connecting to the fused source is easier if you use a Scotchlok connector. Connections to the switch should be made with insulated solderless connectors.
Run another wire from the second terminal on the switch to the device being controlled by the switch as shown in this diagram. Because cars and trucks use the body as the ground side of the circuit, there is no need to run a second wire for ground.
Tip
- Be sure to tape all connections securely.
Items you will need
- Toggle switch Wire Test light Scotchlok connector Solderless connectors
