How to Replace a Camper Shell Sliding Window

Auteur: Peter Berry
Date De Création: 18 Août 2021
Date De Mise À Jour: 1 Juillet 2024
Anonim
Truck Camper Shell Window Replacement
Vidéo: Truck Camper Shell Window Replacement

Contenu


Sliding camper shell windows are positioned in a track. Removing and replacing the camper shell window is relatively simple with a small socket or crescent wrench. Finding a replacement window requires ordering directly from the manufacturer or purchasing a custom piece of glass from a glass shop. Cutting a new window from plexiglass is also an excellent budget option. Replacing the window is accomplished by a single person in less than one hour, not counting the time spent locating and purchasing the replacement window.

Step 1

Wear a pair of thick gloves and remove any broken glass from the window track and camper interior. Place the glass in a durable trash container to reduce the danger of sharp edges.

Step 2

Use a socket or crescent wrench to remove the screws from the track. The screws are located on the interior side of most camper shell windows. Place the screws in a safe place to prevent loss.

Step 3

Pull the interior side of the track to create separation from the window. Do not pull the track off of the camper shell. A small gap is sufficient for the window replacement. Inspect the track and remove old glass and debris from the tight space. The track must have a clear slot for the new window.


Step 4

Inspect the window seal for damage before installing the new window. The seal is the rubber on either side of the track. Look for breaks and white rotting to indicate a poor seal. Remove the old seal with a putty knife and replace it with a new adhesive-backed seal. Adhesive-backed window seals are available through most hardware stores.

Slide the window handle to the open position. The handle is a piece of plastic that sits on the track. Place the new window in the track with one end aligned with the handle. The end will fit inside of the handle slot. Replace the screws and tighten them with the socket wrench. Test the new window.

Tip

  • Cover the window opening with plastic and tape until the new window arrives. Leaving the window seal exposed allows moisture to enter the camper shell.

Items you will need

  • Socket wrench
  • Trash can
  • Putty knife
  • Adhesive window seal
  • New window

A certificate of title, alo known a a pink lip, will be iued by a tate’ Department of Motor Vehicle or equivalent office to repreent the ownerhip of a car and to document any lien holder that have a e...

How to Run a TV Off of a Car Battery

Randy Alexander

Juillet 2024

The battery of a car can power on an aortment of device intalled in your vehicle. After tarting, your car doent ue much electricity from the battery. The car run motly on the engine, leaving the batt...

Recommandé Par Nous