Contenu
Many vehicles have chrome trim installed from the factory. Over time the trim can become scratched, torn or dented. You may also get bored with your car looking exactly like every other model on the road. Chrome trim can be removed, but there are steps that need to be taken so that the car isnt scratched or left with marks where the trim was placed. Here are the correct procedures for removal.
Step 1
Locate a corner or end of the chrome trim that you want to remove. Slowly peel up the corner. If the corner wont peel, carefully use a flat head screwdriver to pry it up without scratching the paint.
Step 2
Peel the chrome trim away from the surface of the car. Peeling too fast can cause the trim to break and leave no edge to lift up. Peeling too fast may also damage the paint by peeling it away from the car. Peel all of the chrome trim from the car with slow care.
Step 3
Use a drill and rubber wheel (feels like a pencil eraser) and place the side edge of the rubber wheel on the surface of the car. Use the wheel to remove any residue left behind under the trim by tape or glue adhesive. The rubber wheel heats the residue enough to remove it, but doesnt heat the paint on the car enough to cause damage. Use the wheel on any area with adhesive residue.
Wipe the area with a lint-free towel and wax and grease remover. The wax and grease remover will remove any remaining adhesive residue without harming the cars surface.
Items you will need
- Wax and grease remover
- Lint-free towel
- Drill
- Rubber wheel to fit on drill
- Flat head screwdriver
