Contenu
Jacking up your Honda Pilot may be necessary for changing the oil, replacing a tire or doing any kind of repair that requires the wheels to come off or to open up room under the vehicle. Lifting your Honda Pilot is the most fundamental aspect of repairing the SUV, but it can also be the most dangerous if you dont follow guidelines and take precautions. It is not uncommon for people to get injured or die from raising their vehicle improperly.
Step 1
Engage the emergency brake so that the Honda Pilot doesnt roll back if you are jacking up the front.
Step 2
Place the jack under the front subframe and begin jacking. The subframe is similar to the frame but mainly supports the engine and suspension components. You can distinguish the subframe from other vehicle components because the subframe is about 2 inches thick and has a squarish shape to it.
Step 3
Jack the Honda high enough so that you have access to what you need.
Step 4
Place jack stands at the right and left pinch welds below the front doors. Honda calls for jack stands to be placed toward the front of the vehicle, and there will be arrows pointing toward locations to place the jack stands.
Lower the Pilot onto the jack stands, and remove the jack.
Tip
- If you are jacking the rear of the vehicle rather than the front, use small pieces of two-by-fours to chock the front wheels from rolling toward the front. This is simply a safety precaution.
Warning
- Never work under your car before placing jack stands underneath it, because the jack itself could fail and cause the vehicle to fall on you.
Items you will need
- Jack
- Jack stands
