Hesston 6400 Engine Specs

Auteur: Robert Simon
Date De Création: 16 Juin 2021
Date De Mise À Jour: 1 Juillet 2024
Anonim
6400 Hesston Swather
Vidéo: 6400 Hesston Swather

Contenu


The Hesston 6400 is a grain windrower no longer manufactured by the company. It can still be found used, however, at dealerships or online. Hesston replaced the model with the 6450 windrower, placing the engine farther away from the operator. The company also outfitted the operators platform with rubber cushion mounts to reduce engine noise. A windrower cuts hay or other grasses in large sections, setting them up into rows, or "windrows," for collection.

Engine

The Hesston 6400 is equipped with a Chrysler industrial, six-cylinder gas engine, model HB 225. The engine runs at 2,300 revolutions per minute (rpm) with no load, with a power of 48 kW. The fuel tank capacity is 110 liters. The engine crankshaft drives the hydrostatic traction drive using two pumps, through a series of belts and sheaves. The windrower also has two traction drive wheels, two rear castor wheels, and a moveable steering wheel support column to control ground speed. Foot pedals operate the hydraulic header and reel controls. The tractor is equipped with one multiple V and five single V belts, and lubrication takes an average 10 to 15 minutes.


Operation

The Hesston 6400 engine consumes an average 8 liters (30 gallons) of fuel per hour. The 110 liter tank allows for approximately 12 hours of running time before it needs refilling. The combined noise of the engine and general operation of the tractor results in approximately 90 decibels at the operators ear level, requiring protective ear coverings for extended exposure.

Miscellaneous

The Hesston 6400 engine is connected to a Sund-Strand Hydrostatic traction drive with a Borg-Warner No. 6 power wheel. The machines table and reel lift are powered using an auxiliary pump in hydrostatic transmission. The Hesston 6400 engine powers a set of brakes governed by a movable steering column and a lever-operated parking brake. The machines steeling wheel is powered by hydrostatic pumps.

How to Wire a Horn Relay

Peter Berry

Juillet 2024

In the continuing effort to improve ga mileage auto maker have found inventive way to reduce vehicle weight. Uing new alloy, platic and thinner material i tandard practice in newer car. o too i the u...

How to De-Ice a Gas Tank Door

Peter Berry

Juillet 2024

In the winter eaon, keeping a full ga tank help prevent frozen water from entering your fuel line, which can potentially cot you a new fuel pump. Unfortunately, the very ame cold temperature that mak...

Nous Conseillons