Contenu
The method you employ to remove scratches from your car after its been keyed depends on how deep the scratch goes. The first coat on top of your cars steel frame is a primer, which is followed by the actual color coat and then a clear top coat. If the scratch went into the primer or the steel itself, youll need to repaint the entire panel. However, if the scratch did not fully penetrate the color, you may be able to buff the scratch out yourself.
Step 1
Look into the scratch and check whether you can still see your cars color. If you see steel, you may have to repaint the entire panel. If you see color in all or part of the scratch, you can attempt to repair the damage yourself.
Step 2
Rub a substance of a substantially different color into the scratch. For example, rub black shoe polish into the scratch if your car is white. This will ensure that you dont sand down too far.
Step 3
Attach the sandpaper to a sanding block. Dip the sandpaper into a solution of water and three drops of dish detergent.
Step 4
Sand at a 60-degree angle to the scratch, moving along the length of the scratch. Wet the sandpaper frequently between strokes. Continue until you no longer see the substance -- shoe polish in this case -- that you rubbed into the scratch. Be careful not to sand through the paint color.
Step 5
Look at the dishwater: If you see color, you sanded through the top clearcoat and will need to apply a new layer of clearcoat.
Step 6
Dry the scratch with a hair dryer, heat gun or out in the open air.
Step 7
Squeeze rubbing compound on to the scratch. Polish the scratch with a cloth, by hand, or with a polishing wheel. Be careful not to polish through the paint layer.
Wipe away any remaining rubbing compound with a cloth.
Tip
- Wax your entire car after repairing the scratch, for the best results.
Items you will need
- 2,000- to 3,000-grit ultrafine wet/dry sandpaper
- Sanding block
- Dish detergent
- Hair dryer or heat gun
