Contenu
You may get a dent in your car hood if an object falls on it or you sat on the hood and it bent. You can save a trip to the garage and money by solving the problem at home. With a few basic tools, you can repair your bent car hood without the need of professional assistance.
Step 1
Assess the damage. If the car hood has completely buckled, you may not be able to fix it unless you are a mechanic. However, if the hood is bent from daily wear and tear (from sitting on it, for example), you can hammer out minor dents.
Step 2
Remove the hood of your car. Unscrew it from the hinges, which are usually located underneath the front windscreen. Refer to the cars manual if you are unsure about how to do this because each model of car is different. Get a friend to help because the hood may be heavy.
Step 3
Place the hood upside down on the grass or an old piece of carpet to prevent scratching the paint while you repair the hood.
Step 4
Use the hammer to knock the dents out of the car hood. Strike the hood with firm, steady hits directly on the bend or dent. Knock the dents out slowly. It is better to use several, gentler hits instead of one strong hit that may cause more damage to the hood.
Step 5
Use the block of wood on areas with large dents. Place the wood on the area and hammer the wood, instead of directly hitting the car hood. The wooden block will spread the pressure out over a greater area and help fix the dent.
Step 6
Repeat steps 4 and 5 until the bend has been removed or minimized to your satisfaction. Turn the hood over if you need to work at the bends from the opposite side.
Step 7
Paint the damaged area, if necessary, with car paint that matches the original color of the car. Let it dry.
Replace the hood by screwing it back onto the hinges. Align the hood correctly with the grill so that it closes properly.
Tips
- Get a friend to help you steady the car hood while you hammer out the bend. Your hammer hits will be more accurate when the hood is stable.
- You can also use a metalworking hammer or dolly to hammer out the bend.
Items you will need
- Screwdriver
- Rubber-headed hammer
- Block of wood 20 inches by 10 inches by 3 inches
- Car paint matching your cars color
- Paint brush or sponge
