Contenu
- Step 1
- Step 2
- Step 3
- Step 4
- Step 5
- Step 6
- Step 7
- Step 8
- Step 9
- Step 10
- Step 11
- Step 12
- Step 13
- Step 14
- Step 15
- Warning
- Items you will need
An air compressor is a device that pressurizes air for use in pneumatic tools, inflation and painting. Unfortunately, air compressors can be very loud, whether theyre in your garage or basement. To dampen the loud rumble that most air compressors emit, you can make a soundproof enclosure for it. By placing a soundproof box around the air compressors main body, you can create nearly complete silence while it is running. Only very specialized and expensive equipment could completely silence your air compressor, but you can get it to a mere whisper with a soundproof enclosure.
Step 1
Measure the dimensions of your air compressor using the tape measure. Add about 2 inches to each measurement, since you are making a box to fit over the compressor. Write down the height, length and width. You will need them when cutting plywood for the enclosure.
Step 2
Saw the 1/2-inch-thick plywood to the dimensions of the width and length of your air compressor. This piece will be the top for the enclosure.
Step 3
Saw two pieces of plywood measuring the length and height of the air compressor. These pieces of plywood will be the sides to the enclosure.
Step 4
Saw two more pieces of plywood measuring the width and height of the air compressor.
Step 5
Use the scissors to cut five pieces of vinyl soundproof barrier in the same dimensions you used to cut the wood.
Step 6
Attach the five pieces of wood you cut into the shape of a box using the wood glue. One side of the box will be missing, since the enclosure will fit over the air compressor.
Step 7
Let the glue sit until it has completely dried.
Step 8
Use the soundproofing adhesive to attach each of the five pieces of vinyl soundproof barrier to the inside walls of the plywood box.
Step 9
Paint the outer walls of the plywood enclosure using a paintbrush and sound deafening paint.
Step 10
Allow the paint and the soundproofing adhesive to dry overnight.
Step 11
Place the box over your air compressor. Take note of where on the box your air compressors power cord, air hose and air inlet are located.
Step 12
Drill a hole in the box for the air compressors air hose to run through.
Step 13
Drill a hole in the box for your air compressors power cord to run through.
Step 14
Drill two holes in the box in the general region of where your air compressors air inlet is. For your air compressor to function properly, it must have access to air. These holes will let through some noise, but they are necessary.
Step 15
Run the power cord and air hose through their corresponding holes in the enclosure, and place the box over the air compressor.
Pack small amounts of vinyl soundproof barrier into any gaps in the area between the cords and the enclosure. Make sure not to do this to the air holes you drilled.
Warning
- Do not make an enclosure for your air compressor if it is powered by gasoline. This will cause the gas exhaust to accumulate in the enclosure, which can damage the compressor.
Items you will need
- Tape measure
- 1/2-inch-thick plywood
- Saw
- Wood glue
- Power drill
- Vinyl soundproof barrier
- Scissors
- Soundproofing adhesive
- Sound deadening paint
- Paintbrush
