How to Replace Toyota Corolla License Plate Light Bulb

Auteur: Lewis Jackson
Date De Création: 9 Peut 2021
Date De Mise À Jour: 1 Juillet 2024
Anonim
How To Replace Toyota Corolla License Plate Lamp Bulb
Vidéo: How To Replace Toyota Corolla License Plate Lamp Bulb

Contenu

The Corolla has been a part of Toyotas lineup since 1968; it has had one of the longest runs of any car model. Before replacing a failed license plate bulb, check the fuse. Be careful of sharp edges in the trunk under the trim panel.


Step 1

Open the trunk and locate the clips that hold the interior trim panel in place. Remove the clips by turning the center of a clip with the Phillips screwdriver a quarter turn, and using the trim tool to pop the clip out. Set the trim panel aside.

Step 2

Disconnect the license plate light electric connector. Use the small flat-head screwdriver to push the claw in and release the assembly.

Step 3

Turn the bulb socket a quarter turn counterclockwise and remove it from the assembly. Pull the bulb straight out of the socket and install the new bulb. Put the socket back into the assembly and turn it a quarter turn clockwise to lock it into place.

Install the light assembly back into the trunk by lining up the claw and pushing in until you hear it click into place. Plug in the electrical connector and install the interior trim panel. Push the clips into place, then push the center of the clips in to tighten them.


Items you will need

  • Small flat-head screwdriver
  • Phillips screwdriver
  • Plastic trim tool
  • 194 bulb

The pare tire on a Ford F150 hang below the truck bed, jut forward of the back bumper. Having a properly maintained pare tire can be a life aver if you get a flat tire while driving your F150. With t...

Reetting the ilverado peedometer may be neceary if it become tuck after a malfunction. In thi cae, the peedometer i rendered virtually uele ince you rely on it to adjut your peed to obey the peed limi...

Postes Intéressants