Contenu
Repairing an electric window on a sonata can only be done after it is diagnosed. You must know what part of the window is not working. Try all the windows to make sure the problem is isolated. If none of the windows work, an electrical problem is evident. If only one window does not work, the problem is most likely mechanical, but an electrical problem should not be ruled out.
Step 1
Remove the two screws in the arm rest and the singular screw in the plastic cover in the door handle. Insert the common screwdriver between the door panel and the door and pry all the trim fasteners out of the door.
Step 2
Disconnect the electrical plugs from the power window switch and the door lock switch. Remove the door panel. Pull the moisture barrier back to expose the window regulator and motor.
Step 3
Disconnect the electrical plug from the window motor. If the motor is the problem, remove it by taking out the three 10mm bolts securing the motor to the regulator and remove the motor. Reverse the procedure to replace it.
Step 4
Remove the regulator with the motor attached, if the problem is with the regulator. The regulator is a single-post, cable-operated unit with a remote motor. Remove the two bolts on the post securing the window to the regulator with a 10mm socket.
Step 5
Remove both 10mm nuts securing the regulator to the door frame—there is one nut on the top of the post and the other on the bottom. Remove the three 10mm bolts securing the motor to the door frame. Withdraw the regulator and motor through the access panel.
Install all parts in reverse order of removal.
Tip
- If you cannot hear the motor running when the window switch is depressed, the problem is with the motor or the wiring to the motor. Wiring rarely goes bad, but in the abundance of caution, check the wiring to the switch with a voltmeter to check for power.
Items you will need
- Phillips screwdriver
- Common screwdriver
- ¼-inch drive ratchet
- Set of ¼-inch drive sockets
- Voltmeter (optional)
