How to Remove a Cars Engine

Auteur: Judy Howell
Date De Création: 3 Juillet 2021
Date De Mise À Jour: 23 Juin 2024
Anonim
How to Remove an Engine
Vidéo: How to Remove an Engine

Contenu

There may be several reasons for having to remove a cars engine. The engine may be using oil, a rod may be knocking, the engine may have too many miles on it and may need to have the cylinders bored for new pistons and the engine may need to be overhauled. The old engine may be locked up and the car needs a new engine. Here are the steps to take the old engine out of the car.


Step 1

Park the car where you can get the engine hoist positioned. Use a wrench to take the bolts out of the hinges on the inside of the hood and take the hood off. The hood is heavy so get a friend to help. Take the negative cable off the battery.

Step 2

Drain the radiator fluid into a five gallon bucket and remove the hoses. Cut the hoses if they wont come off, because its easier to replace the hose than the metal connectors. Take off the fan, take the tension pulley, or alternator loose and take out the radiator. Loosen the fuel lines and the intake air supply.

Step 3

Use a wrench to loosen the power steering pump. Pull the air condition compressor and the power steering pump out of the way and leave all the hoses connected. Take the electric wires loose from the motor, leaving the spark plug wires attached until later. Loosen the exhaust manifold and use a wrench to take the bolts off where the motor is connected to the transmission.


Step 4

Raise the car with a floor jack and put jack stands under the car to keep it from falling on you. Slide underneath the car and take the starter and exhaust pipe connectors off. Remove the transmission connections at the cross member.

Step 5

Take the bolts out of the transmission connections at the motor with a wrench. Use a wrench to remove the bolts from the motor mount connection. Slide out from underneath the car and remove the jack stands and let the car down.

Bolt a heavy chain to both sides of the motor and bring the engine hoist around. Pull the motor out of the car slowly, making sure the front of the motor is higher than the back. Make sure not to hit the car as you bring the engine away from the car.

Tip

  • Some people like to leave the transmission attached to the motor. It may be easier to pull the transmission with the motor.

Items you will need

  • Engine hoist
  • Wrench
  • 5-gallon bucket
  • Heavy chain

How to Make Stiff Tires Soft

Randy Alexander

Juin 2024

The condition of a tire directly impact how well it perform. It i neceary for tire to be oft, a tiff, dry tire can negatively impact performance, which i epecially important when conidering racing ca...

Yamaha 350 Big Bear Specifications

Randy Alexander

Juin 2024

Yamaha Motor Company Big Bear 350 i an all-terrain vehicle. It wa introduced in 1987 in two color -- red and white. The 350 -- Yamaha’ firt ATV 4-by-4 model -- wa produced until 1999, but with ome mod...

Intéressant Sur Le Site