Contenu
Lexus batteries are jump started using the method that works for most vehicles. A working vehicle is lined up with a car with a dead battery, and using jumper cables, the working car feeds energy to the non-working car. The Lexus battery will feed off the working cars battery, thus allowing it to charge and once again be used. You typically know that your battery is dead when the vehicle doesnt power on or electrical components, such as lights and radio dont work.
Step 1
Take the keys out of your Lexus and ensure the ignition switch is not turned to the "On" position.
Step 2
Park the working vehicle beside or in front of your Lexus and pop both hoods.
Step 3
Attach a positive jumper cable (this is red or has a "+" sign) to the positive terminal of the Lexus battery (this is red or has a "+" sign).
Step 4
Attach the other positive jumper cable to the positive terminal of the working cars battery.
Step 5
Attach a negative jumper cable (this is black or has a "-" sign) to the negative terminal of the working cars battery (this is black or has a "-" sign).
Step 6
Attach the other negative jumper cable to a block of metal found somewhere under the hood of the Lexus to ground your circuit.
Start up the working car and your Lexus. Allow both cars to run for a few minutes so your Lexus battery can charge. Remove the jumper cables in reverse order.
