Contenu
If you ride your motorcycle down the road and see nothing but a blur in the mirror, this may be due to excessive engine vibration and is a dangerous situation. You need the mirror to perform safe lane changes, or that blur could be a police officer approaching at high speed. Fortunately, there is a way to turn that blur into a crystal clear reflection and allow you to have a safe, enjoyable ride.
Step 1
Visit your local motorcycle dealers parts department and purchase a set of mirror vibration isolators. The isolators look like rubber plugs with a threaded rod section on one end and a threaded hole on the other. The isolators are designed to fit between the motorcycles mirror mount and the mirror itself.
Step 2
Remove the motorcycle mirror with a 13 mm wrench.
Step 3
Thread the isolator into the hole for the mirror.
Step 4
Thread the mirror into the hole on the isolator.
Tighten the entire assembly with the 13 mm wrench and adjust the mirror to your preference.
Tip
- To keep threaded sections tight, apply a small amount of blue Loctite onto the threads prior to assembly.
Items you will need
- 13 mm wrench
- Mirror isolator
