Contenu
The correct ampere output from your alternator is important as amperes are the current that powers the electrical items in your car. Items such as heater-fans, wipers and headlights use high amperes and, when you turn them on, your alternator has to adjust its output to meet the energy requirements. If you find that your lights are dim or your heater-fan isnt going fast enough, you need to check the alternator ampere output.
Step 1
Check the amperes your alternator produces if it operates correctly. Look in your cars manual and go to the specification section: its usually at the back. Turn to the page for your alternator details. It tells you the minimum and maximum amperes from the alternator. The minimum is when you are using items that consume small amounts of energy, such as your car stereo. The maximum is when you turn on major energy consuming items. Make a note of the two figures.
Step 2
Wear protective gloves as you need to be in close contact to the car battery to check the ampere output from your alternator. Ensure you dont have loose clothing as you need to start your cars engine.
Step 3
Open the cars hood and secure it. Turn on your cars engine and let it idle. Ensure you dont have energy consuming items turned on such as lights and air-conditioning as you need to check the minimum alternator ampere output.
Step 4
Use a multimeter and set it to read amperes. Put the metal prong on the end of the black wire that extends from the multimeter onto the negative battery terminal. The negative battery terminal has a black cable attached to it and is labeled "Neg." Put the metal prong on the end of the red wire onto the positive terminal of the battery. The positive terminal has a red cable attached to it and is labeled "Pos."
Step 5
Look at the display on the multimeter. It reads the minimum amperes you made a note of earlier. It doesnt matter if its 10 percent higher or lower than the minimum specification. If the reading is more than 10 percent lower, get the alternator checked by a professional. If its more than 10 percent higher, check to make sure no electrical equipment is turned on and if it isnt, get it checked by a professional.
Step 6
Turn on energy consuming equipment in your car: air-conditioning, wipers and lights are good. The more you turn on the more amperes are needed to power them so your alternator adjusts the output, if its operating correctly.
Step 7
Measure the alternator amperes output using your multimeter as before. The reading is near the maximum amperes you made a note of earlier. If the reading is more than 15 percent below the maximum, check youve turned on as many item as possible. If you have, then you need to get the alternator checked. If you havent, turn on more equipment and check the reading again. If theres little or no change then get your alternator checked.
Turn off the cars engine. Close the cars hood.
Items you will need
- Protective gloves
- Multimeter
