Contenu
The Chrysler Sebrings rear license plate is illuminated, as required by most state laws. The light uses a small bulb, which is available at most department and automotive parts stores. The Chrysler Sebrings license plate light is accessible from the cars exterior, which means the trunk panels dont need to be removed to replace the light. The Sebring was discontinued after the 2010 model year.
Step 1
Turn off the Sebrings engine, then move to the cars rear to access the license plate light.
Step 2
Remove the two screws from the light lens, and then pry the lens out. Turn it over; youll see the bulb.
Step 3
Pull the bulb from its socket and discard it. Push the new one into the socket to install it.
Place the license light lens back in its mount. Hold it in place, then insert and tighten the two screws.
Items you will need
- Phillips screwdriver
- Bulb number W5W
