Contenu
The carburetor is one of the main parts of a vehicle. Its job is to regulate the speed of the engine. It does this by measuring the amount of air necessary for the speed at which you wish to travel: it pulls a small amount of air and fuel for low speeds, increasing that amount as you speed up. A flooding carburetor can lead to serious problems, but you can prevent the problem by learning about some of its potential causes.
Dirty Fuel System
Over time, the fuel system will clog due to debris that accumulate in the carburetor. When that happens, its time to clean the carburetor. Turn the engine off before removing the air filter cover. Place a towel, or some other protective material, around it to ensure the carburetor cleaner youre about to use doesnt spread to other parts of the engine. Once you apply the cleaner, use a wire brush to clean the excess oil that has gummed around the carburetor.
Excessive Fuel Pressure
A normal fuel pressure is 6.5 lbs. per square inch. High fuel pressure--usually due to a fuel pump thats defective or worn--can cause carburetor flooding. Check the fuel pump, or if you lack the expertise to do it yourself, seek a professional opinion.
Defective Floats
According to the pmocarb.com, the defective float problem develops when the tang (the metal adjustment on the float) is too long and catches on the webbing part that supports the stanchions on the float pin. To solve the problem, shorten the tang, then readjust the float drop. You will occasionally need to replace the floats on the carburetor. After making such a replacement, compare the old floats to the new ones. Make sure that the pontoons--the parts of the float that actually float in the liquid--are in right relation to the hinges so as to reduce the level of friction with the float chambers.
Dripping
If the engine is shut off and the fuel is dripping down the carburetor, it could be because the fuel line is too close to a radiator hose, an exhaust manifold or another source of heat. The heat causes the fuel--a liquid--to expand past the needle and the seat, which results in flooding. Have a professional investigate this problem.
