Contenu
If youve ever dreamed of becoming a race car driver, but couldnt afford to buy your own race car, then you may want to try out go-kart racing. Go-kart racing is a fun hobby that people of all ages can enjoy. The most enjoyable part of the go-kart racing experience is building your own customized go-kart. The most essential piece of your go-kart will be the engine you put in it. If you are on a tight budget you dont have to drop a ton of money on a powerful engine, as you can make one yourself in the comfort of your own garage!
Step 1
Find an old lawnmower or purchase a cheap one yourself. After you get the lawn mower give it a good examination and make sure no serious damage has been done to it. Also make sure the mower starts and that the pull cord isnt damaged.
Step 2
Clear off your workbench or other designated work station. Make sure all debris and trash is cleaned up and out of the way so that you can work efficiently. Having a clean workspace not only promotes productivity, it increases safety as well.
Step 3
Use a screwdriver to loosen the screws holding the blade in place on the bottom of the mower deck. Remove the blade from the lawn mower drive shaft.
Step 4
Remove the bolts that are holding the engine to the lawn mower deck. Pull the engine free and make sure you disconnect all wires and cords properly. Examine the engine once again to check that you did not inflict any damage while you were removing it from the mower deck.
Step 5
Take a piece of sheet metal and shape it into a bracket. Attach the bracket to the side of the engine. The bracket should be at a 90 degree angle. This particular bracket and its proper placement allows the drive shaft to be connected correctly to the axles.
Step 6
Attach the cog piece to the drive shaft. Take the chain and attach it to the go-karts axle.
Reconnect all the wiring and hook up the carburetor to the gas tube. Fill the tank with gas and pull the cord to start your go-kart engine.
Items you will need
- Go-Kart
- Old or donated lawn mower
- Drive shaft
- Sheet of steel
- Screwdriver
- Chain
- Wrench
